The following technical information is to be submitted to the jurisdiction where the CRN is being applied for:
Examples of Applicable Standards are:
In order to obtain a fitting CRN number the manufacturer must have a quality system implemented that meets the requirements of CSA B51, ISO 9000 series, CSA/CAN3 Z299 (min. level 3) or an ASME U/UM Stamp.
FITTING CRN NUMBERS MUST BE RENEWED BY THE MANUFACTURER EVERY 10 YEARS.
FITTING CRN NUMBERS MUST BE ISSUED IN THE NAME OF THE MANUFACTURER.
Copyright © Round Engineering Inc. 2013 | All Rights Reserved